Specialized in testing of LV switchgears, components and switchgear assemblies.
Tesla Lab - Power Testing and Certification is an independent laboratory specialized in testing of LV switchgears, components and switchgear assemblies. It provides a wide range of equipment and experience in electrical, mechanical, climatic and functional tests for low voltage operating, control, safety and measuring equipment.
Check out Tesla Power Lab
Check out the “Tesla Power Lab”, a new technological platform of nearly 21528ft² that has the most comprehensive facilities for a wide range of electrical, mechanical, climatic and functional tests for the development of electrical equipment. The Tesla Power Lab is also accredited by international certification organisations (DEKRA and UL) for carrying out the most stringent certification tests.
Tesla Lab is accredited by the French accreditation body COFRAC (1) (Comité Français d'Accréditation).
It regularly works in partnership with the international certification bodies: KEMA, CEBEC, UL, CSA, ASTA, Lloyd's Register of Shipping, Bureau Véritas, BBJ-SEP, EZU, GOST-R, …
This platform is supplied by a HV/LV 1250 KVA transformer with: available voltages: 250V, 440V, 550V, 660V, 725V, 1000V and 1100 V available currents: 2500A/440V, 2000A/550V, 1500A/725V.
Its power source is an alternator with: nominal power: 4 MVA instantaneous power: 20 MVA Test characteristics: 30 kA/440V, 24 kA/525V.
Its power source is an alternator with: nominal power: 28 MVA instantaneous power: 100 MVA Test characteristics: 100 kA/440V, 80 kA/525V, 50 kA/725V 100 kA 1 second, 50 kA 3 seconds.
Tesla Lab can relieve you of all the administrative steps involved in a large number of certification procedures. It will take care of the contacts with the certification bodies as well as monitoring the procedure through to the obtaining of the certificate.
A set of equipment and services is personally reserved for you to follow your tests in the best possible conditions: camera for monitoring tests with supervisory screen PC monitor giving results in real time fully equipped room: telephone, computer sockets video recording of tests provision of fuses assistance with all your practical organisation: hotel, transport reservations, …
Three special temperature-rise rooms allow rises in temperature to be measured on the electrical equipment using 72 thermocouples and two central read-out stations. The currents available can reach 6000A in direct or alternative current. The temperature-rise rooms also allow power dissipation to be calculated.
Tests in dry or humid atmospheres (from -4°F to 356°F), cyclical temperature or humidity variation tests, storage tests up to -40°F, cyclical or resonance sinusoidal vibration and tests thermal derating tests.
Shockwave 1.2 µs, peak voltage up to 30 KV, test at 50 Hz, 1 minute, voltage of 1 to 20 KV.
A 3-phase bridge rectifier supplied by one of the 3 platforms allows the carrying out of tests in direct current.
Mechanical durability of electrical equipment tests, bending and tensile tests on equipment terminals, tensile or compression tests up to 20 000 N.
Extinguishability tests with glowing wire up to 1760°F
(1) COFRAC
(Comité Français d'Accréditation) French accreditation body. (Scope of accreditation available on request). Set up in 1994 by the public authorities, the COFRAC provides a means for the laboratories and organisations it accredits to prove their competence and impartiality. Thus it offers companies, consumers and the public authorities a real guarantee of confidence in the services offered by the accredited organisations.