Plug & Play
DIRIS Digiware IO modules give more versatility to the DIRIS Digiware system.
DIRIS Digiware IO-10 modules have 4 digital inputs and 2 digital outputs. The digital inputs can be used to monitor the status of third-party devices such as the physical position of a protective device (ON/OFF, trip), or to collect and count pulses from multi-utility meters. The digital outputs allow the remote control of protective devices by sending a binary output signal. Alarms from other DIRIS Digiware modules (U, I, S etc.) can be assigned to the IO-10’s digital outputs to send signals upon specific conditions (high measurement for example) for additional actions and visibility.
DIRIS Digiware IO-20 modules have 2 analog inputs used to collect analog signals from external sensors (pressure, humidity, temperature...).
|Conformity to standard #1||UL 61010-1 Guide PICQ File E257746|
|Conformity to standard #2||CSA-C22.2 No. 61010-1|
|Conformity to standard #3||ISO 14025|
|Conformity to standard #4||IEC 61557-12|
|Proposition 65 California||WARNING This product can expose you to chemicals including bisphenol A (BPA), which is known to the State of California to cause birth defects or reproductive harm. For more information go to : www.P65Warnings.ca.gov|
|Conformity to standards||
|UL file number||E257746|
|In/out||2 analogue inputs|
|Type||Analogue input module|
|Operating temperature||-4 ... +122°F / -20 ... +50°C|
|Storage temperature||-40 ... +158°F / -40 ... +70°C|
|Type of accessory/spare part||Other|
|Weight of the packing unit||0.09|
|Length of the packing unit||0.03|
|Width of the packing unit||0.08|
|Depth of the packing unit||0.12|
|Country of origin||FR|
|Discount Policy Label||MEASUREMENT SYSTEM PACKAGE|